| Age | Commit message (Collapse) | Author |
|---|
|
The latter is what most other projects use
|
|
Before this commit pressing the free space button when Filelight
is not installed would show a singular action called "Install
Filelight to View Disk Usage Statistics…". Pressing this button
would open the store page for Filelight. This is an okay user
experience, but we can do better.
This commit makes it so pressing the free space button when
Filelight is not installed shows an attractive UI that makes clear
that freeing up disk space can be accomplished nicely by installing
Filelight. The "Install Filelight…" button on this UI is connected
to PackageKit directly, so we do not need to show a separate store
like Discover and instead trigger an installation right then and
there. For this, the recently introduced DolphinPackageInstaller
KJob is used.
Installation progress is reported through the status bar similar to
the progress reporting of slowly loading directories or searches.
Installation failure or success is ultimately shown within Dolphin
as a passive notification above the view.
On Microsoft Windows or when PackageKit is not available, the
install button will only open a store page for Filelight.
CCBUG: 477739
|
|
use KRecentFilesAction like Kate and others to signal used
files/dirs
could later be used to plug-in a recently used menu, too,
if ever wanted
avoids that this dependency could be missed and the functionality
is not there, too
|
|
This commit adds a guided setup that leads users from a situation
in which they try to "sudo dolphin" towards them successfully
setting up and using kio-admin.
1. When users enter "sudo dolphin", they are told to start Dolphin
by typing "dolphin --sudo" or "dolphin --admin" instead.
2. When Dolphin is started with "--sudo" or "--admin" it checks
whether an "admin" protocol is installed. If not, a guided
setup leads users towards installing it.
3. After that, Dolphin starts with an installed "admin" protocoll
like kio-admin. Now a non-modal information dialog appears that
explains how to activate and use kio-admin.
|
|
dolphin_generalsettings uses signals, so needs moc
|
|
That's used here and on Windows is no longer implicitly provided by KF.
|
|
This commit introduces an action which creates a new folder with a name
specified by the user and moves all the currently selected items there
in one go.
This action is implemented as a KFileItemActionPlugin which means users
can disable it on Dolphin's context menu settings page.
BUG: 484555
|
|
This commit adds an "Act as Administrator" toggle action to the
View menu if kio-admin is installed. The action allows switching
between acting as an admin with root-access or not.
This was already possible in Dolphin when kio-admin is installed by
editing the location bar directly. However this is somewhat
unintuitive and there are no warnings at all about the dangers of
acting as an administrator.
This commit adds a warning dialog when triggering the action. It is
somewhat explicit about the risks because this is in fact very
dangerous.
Furthermore, while acting on a view with administrative privileges,
a bar above the view shows up that contains a warning. The bar can
be closed to stop acting with elevated privileges.
The warning dialog can be disabled and re-enabled from the Dolphin
settings but only if the action is even available.
There is a lot more to be done to further improve this feature both
security-wise as well as when it comes to usability. But
considering that we are already encouraging users to use this
feature without any warnings at all, I feel like now is a good time
to merge this.
This work is part of a project funded through the NGI0 Entrust
Fund, a fund established by NLnet with financial support from the
European Commission's Next Generation Internet programme, under the
aegis of DG Communications Networks, Content and Technology. As
such, please contact me if you plan on doing related work so what
you are doing doesn't collide with work I am being funded to do.
|
|
The DESTINATION and THEME arguments are non existent and as such this
breaks the macOS builds and create warnings for the other platforms.
|
|
disabled action
Currently, there's no feedback when the user presses a shortcut of a disabled
action, e.g. cut / paste in a read-only directory. This patch shows a banner
in that case.
It's implemented by enabling a QShortcut for each disabled action. the
QShortcut is deleted when the action is enabled again.
The following actions are included:
cut
paste
rename
moveToTrash
deleteWithTrashShortcut
deleted
createDir
copyToOtherView
moveToOtherView
|
|
For now this just includes the settings for the information panel.
Prior to this commit the options for configuring the information panel
were only exposed via right clicking the information panel. This was
not discoverable enough. Our guidelines also state that much. See:
https://community.kde.org/Get_Involved/Design/Frequently_Discussed_Topics#Context_menus_are_not_enough
The settings page is missing the "Configure" button for the entries in
the information panel, which can only be found in the context menu.
This is because I thought it would be weird to move it to the settings
page. (The "configure" button is used to select the entries for the
information panel)
BUG: 480243
FIXED-IN: 24.05
|
|
When a bar is toggled visible this usually happens because the
user might want to use its functionality now. However, if bars
appear without animation or at a location the user is not
currently looking at, they might not notice that they have appeared
at all.
An animation makes it more likely that the user notices the change
and can then use the newly made visible component.
Another reason for animations for showing or hiding of components
is that it can be disorienting for users when panels or bars
suddenly appear or disappear without animation. There is no visible
movement then, so the user might not know what happened if they
didn't concentrate or blink at that moment. The newly appearing or
disappearing component might also displace other components which
can make it difficult to find what one was just looking at.
These bars animate now after this change:
- Search panel
- Filter bar
- Status bar
This is implemented by extracting the animation code from
SelectionMode::TopBar into a new abstract base class
AnimatedHeightWidget. This class is now also used in
SelectionMode::BottomBar and the animating code there was removed.
These bars are left in Dolphin that stay without animation:
- Menu bar (Would probably need to be implemented in KXmlGui)
- Tool bar (Would probably need to be implemented in KXmlGui)
- Tab bar (Needs a different appraoch because it already inherits
QTabBar and therefore can not inherit AnimatedHeightWidget)
|
|
Dolphin shows the size of directories by listing their contents, which
for some users might cause unwanted load on the file system.
Depending on the size of the subdirectories in question and how the
storage is accessed, this might cause noticeable delays and even
freezing.
This commit adds a new option under "View -> Content Display" that
enables users to set "Folder size:" to "No size", completely disabling
directory size counting. Directory size counting is still enabled by
default.
As a third option for "Folder size" is added, the DirectorySizeCount
boolean setting is replaced with a DirectorySizeMode enum setting. The
old setting is migrated using a kconf_update script.
FEATURE: 477187
GUI:
|
|
Update with the state of the manifest on github and install icons at the
correct location
|
|
|
|
|
|
When possible, use the devicePixelRatio from the scene which on Wayland
unlike the QApplication will properly support fractional scaling.
A KItemViewsUtils class is introduced that can be reused elsewhere.
|
|
The idea behind KMoreTools was to point the user at external tools for a given job.
It provides a rather complex framework for that, including suggesting not-yet-installed tools.
The UX behind that isn't great though, which somewhat deep menu hierarchies and a somewhat arbitrary list of tools.
Most KDE apps have moved away from it, with only Dolphin remaining.
Instead provide direct integration with relevant KDE tools (Filelight, KDiskFree, KFind)
|
|
Remove qt5 specific cmake code too
|
|
|
|
|
|
Regressed in 489b56b68bb29e81337e115c490eea4403001b71
Simplify implementation by sharing making class ViewSettingsPage implement SettingsPageBase sharing implementation with other tabs in viewsettingspage
|
|
It includes a move of the settings in the Navigation and Startup sections to the Interface (formerly Behavior) section.
It also includes a new tab in the View (formerly View Mode) section, called General where some settings regarding Display style, Browsing and Miscellaneous settings
The Interface section has new tabs named Folders & Tabs and Status & Location bars respectively where most of the Startup and Navigation settings moved.
The `dolphin/kcms/kcm_dolphinnavigation` kcm is removed.
|
|
musl does not support fts. There is however a standalone package that
can be used, but it must be linked against. This commit adds a check
that makes sure to link to the external library if it is required.
|
|
We don't need a custom delegate here
Using the standard one from Qt also slightly improves margins
|
|
|
|
This does not move the settings location in files though.
baby step for https://invent.kde.org/system/dolphin/-/issues/36
|
|
|
|
|
|
This reverts commit 047bf33d9050b89243479adb22aaa354b10878a4.
|
|
|
|
|
|
|
|
|
|
|
|
This reverts commit d8de1c37e525580143c60bcd16aee3e7640890f1.
|
|
|
|
|
|
When one instance of Dolphin activates another it passes a startupId (X11) / activation token (wayland) along.
On X11 this is passed using the DESKTOP_STARTUP_ID environment variable. The code tries to read that through KStartupInfo::startupId().
That doesn't work though, since Qt at startup reads the environment variable afterwards. However, it is nice enough to allow us to access
it through QX11Info::nextStartupId(). Use that to read the token in the first instance and pass it to the second instance like we do on Wayland
The user-facing impact of this is minimal since KStartupInfo::setNewStartupId internally falls back to KWindowSystem::forceActiveWindow when no
startupId is passed.
|
|
|
|
Make obvious when actions trigger selection mode.
|
|
The selection mode action is a checkable toggle action named
"Select Files and Folders" which has "Space" as the default
shortcut.
In selection mode a bottom bar with contextual actions is shown.
These should mostly mirror the actions which are available through
the right-click context menu aka DolphinContextMenu.
Resizing of the window might make a overflow button appear in the
bottom selection mode bar.
This commit makes press and hold in the view activate selection
mode. This behaviour is not triggered if the press and hold is
used to either start a rubberband selection or a drag operation
within a short time. The length of the short timeframe is defined
by a QStyleHint. This is currently not implemented in touch
because I can't test it.
Mix the selection mode bars' background colors using a nice
combination of colors from the current color scheme
BUG: 427202
|
|
This will allow Konqueror to use it without relying on the KPart being loaded using KService
|
|
We don't support old-style plugins any more, so no need to install this
|
|
|
|
|
|
|
|
Since it actually adds padding on both left and right sides,
"Side Padding" might be more accurate.
This change is also propagated to variable and method names.
BUG: 453172
|
|
Otherwise, they will have the "lib" prefix
|
|
Task: https://phabricator.kde.org/T14564
|
