| Age | Commit message (Collapse) | Author |
|---|
|
This reverts commit dc149ec5e52f52c514cf362603d05ba8eea506b8.
This prevents a crash. One issue identified is that the commit that
I am reverting here accesses a QDropEvent at a moment in time in
which it might have already been deleted. We cannot check if it
exists by that time because we do not control its lifetime and it
is not a QObject.
|
|
This commit adds a guided setup that leads users from a situation
in which they try to "sudo dolphin" towards them successfully
setting up and using kio-admin.
1. When users enter "sudo dolphin", they are told to start Dolphin
by typing "dolphin --sudo" or "dolphin --admin" instead.
2. When Dolphin is started with "--sudo" or "--admin" it checks
whether an "admin" protocol is installed. If not, a guided
setup leads users towards installing it.
3. After that, Dolphin starts with an installed "admin" protocoll
like kio-admin. Now a non-modal information dialog appears that
explains how to activate and use kio-admin.
|
|
In case of conflict in i18n, keep the version of the branch "ours"
To resolve a particular conflict, "git checkout --ours path/to/file.desktop"
|
|
(cherry picked from commit d9fa656fd2204c617d512de6b4c5ff44f0142a30)
|
|
dolphin_generalsettings uses signals, so needs moc
|
|
In case of conflict in i18n, keep the version of the branch "ours"
To resolve a particular conflict, "git checkout --ours path/to/file.desktop"
|
|
This makes the explanation a bit less jargonistic.
While I rose the issue on Nate's TWIK blog, Sergey Katunin (@sgakerru)
came up with the final wording of this change. Thanks!
|
|
This slightly simplifies code and allows showing
KMessageWidget::Positive message boxes.
|
|
see https://invent.kde.org/frameworks/breeze-icons/-/merge_requests/364#note_969048
|
|
In case of conflict in i18n, keep the version of the branch "ours"
To resolve a particular conflict, "git checkout --ours path/to/file.desktop"
|
|
Merge setting title and progress percent into one method. This
makes sure that the method can be called from all over the place
and will still always show a consistent state instead of partially
showing the progress percent for one progress but the label for
a different one.
This is to enable various tasks reporting progress at the same time
in a way that doesn't lead to a confusing mess for users. Usually
multiple tasks do not show progress at the same time, but when it
happens this commit should make sure that the user experience is
at least bearable.
Allow not having a "Stop" button next to the progress report for
tasks that cannot be stopped.
|
|
|
|
In case of conflict in i18n, keep the version of the branch "ours"
To resolve a particular conflict, "git checkout --ours path/to/file.desktop"
|
|
|
|
|
|
In case of conflict in i18n, keep the version of the branch "ours"
To resolve a particular conflict, "git checkout --ours path/to/file.desktop"
|
|
|
|
In case of conflict in i18n, keep the version of the branch "ours"
To resolve a particular conflict, "git checkout --ours path/to/file.desktop"
|
|
|
|
(cherry picked from commit 5d4729973d58beac659fe581c9160ac5f60af21e)
|
|
|
|
In case of conflict in i18n, keep the version of the branch "ours"
To resolve a particular conflict, "git checkout --ours path/to/file.desktop"
|
|
This avoids an empty menu and points the user towards a useful tool
BUG: 477739
|
|
|
|
In case of conflict in i18n, keep the version of the branch "ours"
To resolve a particular conflict, "git checkout --ours path/to/file.desktop"
|
|
In case of conflict in i18n, keep the version of the branch "ours"
To resolve a particular conflict, "git checkout --ours path/to/file.desktop"
|
|
That's used here and on Windows is no longer implicitly provided by KF.
|
|
In case of conflict in i18n, keep the version of the branch "ours"
To resolve a particular conflict, "git checkout --ours path/to/file.desktop"
|
|
This commit introduces an action which creates a new folder with a name
specified by the user and moves all the currently selected items there
in one go.
This action is implemented as a KFileItemActionPlugin which means users
can disable it on Dolphin's context menu settings page.
BUG: 484555
|
|
|
|
Co-authored-by: Gerasim Troeglazov <[email protected]>
|
|
|
|
The exact effect of the button is not perfectly clear without a
label because it could theoretically also have no effect other than
dismissing the bar (which is not the case). This situation is
clarified through this added label.
The tooltip of the button is adapted to complement the new button
label.
|
|
Items should only be selected if the user wants to act on them.
However, previous to this commit we sometimes selected items even
when there is no reason to assume that the user would like to act
on them. Such selections are dangerous because they make it more
likely that the user manipulates items by accident which they
never even explicitly selected.
Example: The "Up" action is used to navigate to the parent folder.
This will implicitly select the folder one emerged from after
opening the parent folder, so just one accidental press of the
Delete key will lead to data loss if the press goes unnoticed. This
scenario would have been avoided if no folder had been selected
automatically.
The above example becomes even more dangerous if the user is acting
with elevated privileges.
The following implicit selections of items are being removed:
- Selecting items that are being activated
- Selecting folders one emerges from
Even though these items will no longer be selected after these
actions, they will still be marked as current.
The only downside I see is that our indication of which item is "current" is a lot weaker than the selection highlight, so it might be more difficult to spot which folder one has emerged from. However, this could be counter-acted with some other temporary indication if this really turns out to be a problem.
The only downside I see is that our indication of which item is
"current" is a lot weaker than the selection highlight, so it might be
more difficult to spot which folder one has emerged from. However, this
could be counter-acted with some other temporary indication if this
really turns out to be a problem.
BUG: 424723
|
|
|
|
(cherry picked from commit 3e59d49a483e2cdb232f15a54ae5cce931b60b46)
|
|
|
|
|
|
|
|
the framework functions used will setup the proper
icon set and re-coloring and style to use
details see
https://invent.kde.org/frameworks/kiconthemes/-/issues/3
|
|
This option allows to enable preview for locally mounted remote folders
Setting was added in kio: frameworks/kio/#c7d6ff8f218a0c063f762bd236453a7ae00b817e
|
|
This commit adds an "Act as Administrator" toggle action to the
View menu if kio-admin is installed. The action allows switching
between acting as an admin with root-access or not.
This was already possible in Dolphin when kio-admin is installed by
editing the location bar directly. However this is somewhat
unintuitive and there are no warnings at all about the dangers of
acting as an administrator.
This commit adds a warning dialog when triggering the action. It is
somewhat explicit about the risks because this is in fact very
dangerous.
Furthermore, while acting on a view with administrative privileges,
a bar above the view shows up that contains a warning. The bar can
be closed to stop acting with elevated privileges.
The warning dialog can be disabled and re-enabled from the Dolphin
settings but only if the action is even available.
There is a lot more to be done to further improve this feature both
security-wise as well as when it comes to usability. But
considering that we are already encouraging users to use this
feature without any warnings at all, I feel like now is a good time
to merge this.
This work is part of a project funded through the NGI0 Entrust
Fund, a fund established by NLnet with financial support from the
European Commission's Next Generation Internet programme, under the
aegis of DG Communications Networks, Content and Technology. As
such, please contact me if you plan on doing related work so what
you are doing doesn't collide with work I am being funded to do.
|
|
This is a fix for a bug where in network views (or otherwise slow
systems), pressing `Ctrl+Shift+N` multiple times opens multiple popup
windows and thus causes a crash when any of the popups is interacted
with after closing the topmost one. The problem is not the crash with
popups themselves, but that we're opening multiple popups in the first
place.
In regular views this works fine, since the `nameJob` does not take
long time at all and only one popup opens, immediately blocking the
shortcut.
In network views, the `nameJob` seems to take a while to run, since it
is loading info from network. If user spams `Ctrl+Shift+N` shortcut in
frustration, it starts more `nameJob`s and eventually when those jobs
are done, it opens multiple popups.
This code checks that if we're already running a `namejob`, we're very
likely waiting for the `createDir` popup to appear, so we don't do
anything until there is no more `nameJob` running.
I've tested that it works in both network and regular Dolphin views.
BUG:481401
|
|
Default action is select-all.
|
|
For consistency.
|
|
Adjust paste to url to new KF6 signals
BUG: 476670
Signed-off-by: Anthony Fieroni <[email protected]>
|
|
The DESTINATION and THEME arguments are non existent and as such this
breaks the macOS builds and create warnings for the other platforms.
|
|
|
|
|
|
|
